Datasheet

38
 




0[
30
40
21
35
M25x1,5
30
40
21
35
M20x1
,
5
M32x1,5
35
21
30
40
KVT
Split Cable Glands
Product Description
KGM-SUB-D9  ts D-Sub 9 connectors
(Required wall cut-out: ∅ 36 mm, PU: 10)
Order No. 45105 Order No. 45106
KGM-PB  ts DVI and PROFIBUS connectors
(Required wall cut-out: ∅ 42 mm, PU: 10)
Order No. 45107 Order No. 45109
KGM-SUB-D25  ts SUB-D25 connectors
(Required wall cut-out: ∅ 50 mm, PU:10)
Order No. 45108 Order No. 45110
Locknuts with special cut-outs are available
separately. The cut-out dimensions are listed
on pages 170 - 171.
Locknuts
* Only valid for gray product types
** Max. cable diameter of 11 mm | *** Max. cable diameter of 15 mm
Description Type Order Grommets Thread PU
No. small | large Thread length
KVT 20**
45034
45024
1|-
M20 × 1.5
Length: 14 mm
10
KVT 25***
45035
45025
1|-
M25 × 1.5
Length: 14 mm
10
KVT 32
45036
45026
1|-
M32 × 1.5
Length: 14 mm
10
KVT 32 +
KGM-SUB-D9
45037
45027
1|-
M32 × 1.5
Length: 14 mm
10
KVT 40
45203
45028
1|-
M40 × 1.5
Length: 14 mm
10
KVT 40 +
KGM-PB
45205
45029
1|-
M40 × 1.5
Length: 14 mm
10
KVT is a circular split frame for quick and easy
installation and sealing of cables with connectors
or complete cable harnesses.
Polyamide locknuts as well as a sealing ring are
included in the shipment.
For routing D-Sub, DVI or PROFIBUS connectors in
combination with the split cable glands KVT, special
locknuts with cut-outs are required.
IP
up to
Type GMT: Split locknut,
p. 167