Datasheet

44
130
1 7
32 58
5,6
130
1 7
32 58
5,6
130
1 7
32 58
5,6
130
1 7
32 58
5,6
| |
KEL - DPZ 24
Cable entry plates
Gasket on the front.
Gasket and strain
relief on the back.
Product description
KEL-DPZ entry plates are designed to route
and seal standard cables (from 3.2mm – 22mm
in diameter) in limited space.
Simply push standard cables through the thin
membrane and it’s immediately sealed (IP65 /
IP66) and strain relieved.
The KEL-DPZ series consists of four di erent
versions. The size DPZ 24 matches exactly
the cut-out dimensions of 24-pole standard
industrial connectors (pages 44-45).
For applications with limited space the new
KEL-DPZ-B and KEL-DPZ-E series are ideal.
Despite its compact outer dimensions, up to
25 cables from 3.2 to 22 mm can be routed
(pages 46-47).
The round versions of the KEL-DPZ series have
a thread to  t in metric cut-outs from M32 to
M63. Thus cut-outs for standard metric cable
glands can be used (pages 48-49).
The assembly of the KEL-DPZ with cables or
pneumatic hoses can be done within seconds.
Simply put a small slit in the thin membrane
and push the cable through.
ST Plugs (page 27) can be used for sealing
pierced membranes if cables are removed.
Description Type Order No. Number of PU
cables
KEL - DPZ
24 | 14
43700
10
x 3.2 - 6.5 mm
4
x 16 - 22 mm
10
KEL - DPZ
24 | 15
43720 15
x 7.2 - 12 mm 10
KEL - DPZ
24 | 16
43725
8
x 3.2 - 6.5 mm
4
x 5.0 - 9.7 mm
2
x 9.0 - 16.2 mm
2
x 16 - 22 mm
10
KEL - DPZ
24 | 17
43705
6
x 3.2 - 6.5 mm
6
x 5.0 - 10.2 mm
5
x 9.0 - 16.2 mm
10
www.icotek.de tel [phone] - 923 80 0 fax [phone]