User Manual

Version 2.2 March 2005 iControl Confidential page 9
2 About your iControl Box
This section describes some of physical characteristics of the iControl box.
iControl Box Indicator Lights
The iControl box has the following buttons and indicator lights:
DEVICE light:
Blinks green when your box is communicating with lamp modules, door/window sensors,
motion sensors, and other devices. You may not see this LED turn on and off often
because most of your devices act infrequently (such as turning on a light in the evening)
and therefore will blink very infrequently.
STATUS light:
Used for troubleshooting.
LAN light:
Flashes green whenever there is activity on your home IP network.
POWER light:
Steady green when plugged in.
UPDATE BUTTON:
Initiates a iControl box to server uplink communication. Used when you need to manually
update the iControl network with information.
DEVICE BUTTON:
Can be used to enable the iControl box to discover a newly installed device.