User Manual

Version 2.2 March 2005 iControl Confidential page 7
Schedules tab
By clicking on this tab, you will go to a web page where you can set schedules for your
devices. For example, you can set by time of day or day of week, how devices operate.
For example, every night at 10PM, every lamp module changes state causing every light in
the house controlled by a lamp module turn off. This feature is not implemented in Beta.
System tab
This tab is most useful for seeing a complete list of devices in your system and confirming
that a device was installed and is working. The System tab also provides a way to add
and delete a device. You may also access the device page via this tab to change the
device’s name or gather such information as device ID and manufacturer.
Definition of other items on the Summary page
Help button
Help which is indicated by a ‘?’ mark is not yet implemented.
Mode
Your iControl System has three modes, Home, Sleep and Away. You can set your
System in any of the modes. For example, the system can be in Home mode while you
are home and Sleep mode when you are asleep. The mode setting affects the behavior of
the system. For example, you may want receive notifications only when you are Away
from your home.
QuikControl button
QuikControl is shortcut that allows you to have one of your devices take an action.
Click on the QuikControl button and you will see the actions that you can take. Two
actions are available for the starter kit devices: Have a camera take a picture and change
the brightness of a lamp controlled by the lamp module. (You will have had to install a