User Manual

Version 2.2 March 2005 iControl Confidential page 6
Pending Updates window
This window shows the changes that you made to your IContol box or devices.
They will be implemented the next time your iControl box communicates with the
iControl servers.
In this example, the Thermostat will change its setpoint for cooling to 64 degrees
and the heating setpoint to 76 degrees. (Note, a thermostat device is not part of
your Starter Kit but is available as an optional accessory. Please go to
www.icontrol.com for more information.)
Reminders window
Reminders are not implemented in Beta.
Schedules window
Schedules are not implemented in Beta.
Details tab
This tab presents a listing of all the devices installed in your system. It displays their
current state, images from any cameras installed in your system, and the current settings
and ambient temperature from any thermostats installed in your system. If you click on
any device name, you will be taken to its device page which provides detailed information
about the device including the device’s name that you chose, the device ID, and
manufacturer. If you click on a photo image, you will be taken to an expanded view of that
image where you can take additional images and access thumbnails of previously taken
images.
Notifications tab
By clicking on this tab, you will go to a web page where you can set notifications for each
mode (Home, Away, and Sleep). For example, you can have an email sent to you when
your iControl system is in Away mode that a device recognizes a change such as a
Door/Window Sensor detecting an open door. See Chapter 3 entitled, Using your iControl
System, for more details on setting and changing notifications.
Automation tab
By clicking on this tab, you will go to a web page where you can set automations. An
automation is an action taken by a device based on the change in the state of another
device. For example, a Door/Window Sensor detects an open door; when this change
occurs, a camera takes a picture.