User Manual

Version 2.2 March 2005 iControl Confidential page 43
Will the Camera use an Ethernet port on my router?
Yes. It will require a physical port on your router. If you have a four port router, it will use
one of the four ports.
Keychain Remote Control
What are the default buttons?
Unlock Button: Change to Home mode
Lock Button: Change to Away mode
Light Button: Press once to turn on all the lights controlled by a lamp module.
Press again to turn them off.
Star Button: Take a picture
Motion Sensor
How do I test my motion sensor?
1 Remove sensor from mounting plate, then reattach. You have 60 seconds
2 Walk across room and wait for sensor light to turn on
3 Stop, stand still and wait for sensor light to turn off.
4 Repeat Steps 2 & 3 until entire area has been tested
5 Leave the room for at least 60 seconds. After 60 seconds without motion, walk test
mode time expires and the light on the sensor no longer activates when motion is
detected.
Will the Motion Sensor sense my pets?
No for pets less than 40 pounds. This also means that it will not sense children less than
40 pounds.