User Manual

Version 2.2 March 2005 iControl Confidential page 4
Read your Summary page
This section provides a definition of the many terms found on your Summary page and
serves as a good background to the iControl System.
Tabs
Your iControl Summary page has five major tabs.
Summary tab
When you log onto your iControl System from www.icontrol.com, your landing page is the
Summary page. This is where you begin using your System. The Summary page consists
of the following series of windows.
Status window
The top portion of this window indicates the overall status of the system and the
current mode the system is in. The status light can have three possible colors
as described below:
Green – No alarm conditions. System operating normally
Yellow – One or mode device alarm conditions (e.g. motion detected)
Red – System problem (e.g. iControl box communication problem).
The Status window also shows the current mode for your iControl System.
Here, the System is in ‘Away Mode’.
The rest of the Status window is a list showing the current state of all the devices
in the system. In the screen shown earlier, three devices appear: a
door/window sensor called ‘Back door’; a Thermostat showing the current
temperature at 74 degree and its Heat Setpoint to of 69 degrees and Cooling
Setpoint of 61 degrees; and a door/window sensor labeled ‘front door’.
Your house may have many more devices than three and to view these you
place your cursor over the up or down arrow to scroll to see additional devices or
on the small box inside the scroll bar.
Click here
Click here