User Manual
Table Of Contents
Version 2.2 March 2005 iControl Confidential page 20
You can now see a thumbnail picture from your camera. Go to your Summary page
and look under Pictures. Click on the thumbnail to see an expanded view. You can
also manually take pictures now by using the QuikControl button. Additionally you can
create automations using the camera. See Chapter 3 in this manual for more details.
Setting up your camera for video
This is an advanced feature of the iControl System. You should be familiar with port
forwarding functionality on home network routers before attempting to implement this
feature. You must first have your camera set up for pictures. To set up for video,
1 Go to the Summary page.
2 Under Pictures, click on the picture thumbnail from the camera for which you want
to enable video. An expanded window will open.
3 Click on menu item, Live Video, shown below. The menu item shown here is inside
of the expanded picture window.
4 You will then see the following dialog box. Record the IP address and port number
shown in the window (Here the IP address is 192.168.1.102 and the port number is
80).
At this point you need to configure your location’s router to enable port forwarding. LEAVE
the window shown above open, as you will need it to finish your work. Go to the next
section.