User Manual
Table Of Contents
Version 2.2 March 2005 iControl Confidential page 19
4 Using your Camera
You can use your iControl Wired or Wireless Camera to see pictures (images) or live video
from your location while you are away.
Setting up your camera for pictures
1 Go to the System tab.
2 Navigate to the ‘Add Device’ heading under the tab heading on the left hand side of the
page.
3 At the Add Device screen shown below, first choose the technology and then the type
of technology from the drop down menus. Here we are adding a wired IP camera, so
the technology is IP and the type is an Axis Network Camera Model 205.
4 Create a name for the camera.
5 Enter the serial number from the back of the camera. The number should have the
following 12 character format.
S/N 00408C648CCD
Do not enter the letters ‘S/N’.
6 Click Add. You should now see the new camera in the System device list with a
yellow dot next to it. The yellow dot indicates that it is installing. Wait a few minutes
for the iControl Box to discover and configure the camera. Once the iControl box
completed its communication, the yellow dot will turn green indicating that the
camera is installed and operating. If you do not see a green dot within five mintues,
refer to the Frequently Asked Questions (FAQ) section of this manual for more
assistance.