User Manual

Version 2.2 March 2005 iControl Confidential page 16
Tip: To delete an existing notification, select the Notification tab, and click on the
mode from which you want to remove notification. Click on the trash can icon and click on
the Save button.
Change or set automation
Automation enables you to program your devices to take an action when another device
recognizes a change. For example, you may want to take a picture when someone enters
your front door while you are away.
In Beta, you can configure two types of automations: the iControl Camera takes a picture
or the Lamp Module turns lights on or off.
To have the camera take a picture based on a device recognizing a change
1 Go to the Summary page, then click on the Automation button.
2 In this example, we want the camera to take a picture when the Hall Motion Sensor
detects a change when we are away. Go to the column ‘Away’ and the row entitled,
‘Hall Motion Sensor’.