User Manual

8
MIDI Info Page
MIDI Information:
Number of MIDI Ports: Shows the total number of
MIDI ports available on the 5-pin DIN Jacks and
USB Device Jacks.
Note: Each MIDI port is a 16-channel data stream.
Number of DIN pairs: Shows the number of
standard 5-pin MIDI DIN connector pairs (In/Out).
Number of Device jacks: Shows the number of
USB-B connections available for Mac or PC
computer devices.
Number of USB MIDI Ports/Device Jack: Each
Device Jack can can support multiple MIDI ports.
This entry shows the total number of ports
supported on each jack.
Enable Running Status on DIN ports: Running
Status is a MIDI command that must be
implemented - correctly - by receiving devices, so
it is disabled by default. Its function is to reduce
the amount of MIDI data by eliminating redundant
status bytes.
Port Information:
General: Every MIDI port available to each mio2
connection can have both its input and output
enabled or disabled. Everything is on by default.
Port Names can be edited.
Note: The default port names are based on the
factory default routing so they may no longer be
appropriate once you modify the routing.