User manual

7
Transport control buttons section
11. Bank </> buttons
 Track < Shift “one” channel up for all faders (except the master channel).
 Track > Shift “one” channel down for all faders (except the master channel).
 Bank < Shift “eight” channels up for all faders (except the master channel).
 Bank > Shift “eight” channels down for all faders (except the master channel).
Automation section
 READ button - Press the READ button to activate the read function of the current audio
track.
 WRITE button - Press the WRITE button to activate the write function of the current audio
track.
Other control buttons
 Jog button - Activate to use the encoder as a jog wheel.
 The jog wheel is used for various purposes specic to the DAW application, including shuttle
and scrubbing functions.
 Program button - Use together with the encoder to change the sound bank of your soft-
synth.
 (Tip: Please refer to Appendix A for Mackie Control and HUI protocol functions.)
6. Modulation jog wheel
 Rotate to adjust the modulation effect.
7. Pitch jog wheel
 Rotate to adjust the pitch bend. It returns to default, “0” when released.
8. Octave buttons
 Raise or lower the pitches played on your keyboard.
9. Transpose button (Use in conjuction with the Octave up/dwon
buttons)
 Raise or lower the pitches (by less than an octave) played on your keyboard.

 (Tip: While pressing and holding the “Transpose” button, press a keyswitch within an octave
range from the original c1 position) to change the c1 to that particular switch.)
10. Track </> buttons
 PLAY button - Activate the play function of the DAW.
 STOP button - Activate the stop function of the DAW.
 REC button - Activate the record function of the DAW.
 REWIND button - Activate the rewind function of the DAW.
 FAST FORWARD button - Activate the fast forward function of the DAW.
 LOOP button - Activate the loop function of the DAW.