Operation Manual
HOW TO INSTALL THE IFIT TRACK APP
Pair, set up, and sync the tracker pod with your iOS device
(iPhone
®
4s and later) or your Android device (Android 4.3 and
later) that supports BLUETOOTH
®
4.0 wireless technology.
On your iOS or Android device, open the App Store℠ or the Google
Play™ store, search for the free iFit Track app, and then install the
app on your device. Make sure that the BLUETOOTH option is
enabled on your device.
Then, open the iFit Track app and follow the instructions to set up
an iFit account, customize settings for the tracker pod, enter and
track information, and set goals. Make sure to customize the set-
tings and check the calibration of the tracker pod.
To pair the tracker pod to the iFit Track app on your device, press
both buttons on the tracker pod simultaneously for several seconds
until the words SYNC ON appear in the display.
Then, open the iFit Track app, select the tracker pod from the list of
discoverable devices, and touch the Connect button. After 1 minute,
the display on the tracker pod will notify you if pairing succeeded or
failed.
When the tracker pod is paired, the BLUETOOTH icon will appear
in the battery level display on the tracker pod. After it is paired, the
tracker pod will sync automatically whenever the iFit Track app is
open and the BLUETOOTH option is enabled on your device.
HOW TO CHARGE THE TRACKER POD
Battery Life. The tracker pod contains a rechargeable lithium
battery. With normal use, a fully charged tracker pod will run for
approximately 5 to 7 days before needing a charge. Check the
battery level of the tracker pod by pressing the top button on the
tracker pod repeatedly until the battery level display appears. When
the battery level is at 10 percent and at 5 percent, the tracker pod
will vibrate for 5 seconds to notify you that the battery needs to be
charged. IMPORTANT: Make sure that the tracker pod syncs
to the iFit Track app when the battery level is low; the data
recorded on the tracker pod will be deleted when the battery
level is at zero percent.
How to Charge the Tracker Pod. To charge the tracker pod, first
attach the charger cable to the tracker pod. Note: You cannot attach
the charger cable to the tracker pod while it is inserted in the band
or in the clip.
Align the tab and the contacts on the char-
ger cable with the slot and the contacts on
the back of the tracker pod, and then fas-
ten the strap on the charger cable around
the tracker pod. Next, plug the charger
cable into a USB port on your computer.
It will take approximately 4 to 8 hours
for the tracker pod to charge completely.
Note: To charge the tracker pod more quickly, plug the charger cable
into a USB wall adapter (not included) or a USB car charger (not
included).
HOW TO WEAR THE TRACKER POD
IN THE BAND
How to Insert the Tracker Pod Into
the Band. Orient the tracker pod so
that the arrow on the underside of
the tracker pod is aligned with the
arrow on the inner side of the band.
Then, press the tracker pod into
the opening in the inner side of the
band. Tip: Insert the end of the
tracker pod with the arrow into
the band first, and then press
the other end of the tracker pod
into place. Reverse these actions
to remove the tracker pod from the
band.
How to Fasten the Band. Wrap the
band around your wrist and press
the pegs on the clasp firmly into
the desired adjustment slots. Then,
slide the lock over the clasp to hold
the clasp in place. Make sure that
the band is slightly loose on your
wrist. Reverse these actions to
unfasten the band.
Note: As with any watch or jewelry, a very small percentage of users
may experience skin irritation while wearing the band. If you experi-
ence any skin irritation, discontinue wearing the band and wear the
tracker pod in the included clip. If you have questions, send email to
support@iFit.com.
IN THE CLIP
Orient the tracker pod so that the display
is facing upward. Then, orient the clip so
that the opening in the outer side of the
clip is facing upward.
Insert one end of the tracker pod into the
opening in the outer side of the clip, and
then press the other end of the tracker
pod into place. Then, slide the clip onto
your clothing. Reverse these actions to remove the tracker pod from
the clip.
INDEPENDENTLY
Simply place the tracker pod in your pocket to carry the tracker pod
independently. Make sure that the tracker pod will not fall out of
your pocket as you move.