User Guide

CHAPTER10:TIMECLOCKTERMINAL SUPERVISORMODE
AdvancedSupervisorModeOptions
 CustomizeNetworkSettings
 ResetSoftwareAdminPassword

LOG INTOSUPERVISOR MODE
 EnterSupervisorModeatyouremployeetimeclockterminal.
 Press onthetimeclockterminal.
 Enterinyoursecuritycode‐thedefaultsecuritycodeis"000000".
 ScrollthroughtheoptionsusingUporDown.
 PressEnter,whenyoufindtheoptionyouwould
liketoview.
 ToexitSupervisorMode,pressClear.

PARENTCLOCK SUPERVISOR MODESETTINGS
VIEWIPADDRESS
LookuptheIPaddressassignedtotheclock.Also,allowsforassigningastaticIPaddress,subnetmask,gateway,
andDNS.
NETWORKSETTING
LANSETTINGS 
SETIPADDRESS
LookuptheEthernetIPaddressassignedtotheclock.Also,allowsforassigningastaticIPaddress,subnetmask,
gateway,andDNS.
 ToassignastaticIPaddress,followtheinstructionsunder
Error! Reference source not found..
 ToeraseallnetworksettingsandreverttoDHCPsothattherouterwillassigntheIPaddress,settheIP
addressto000.000.000.000.

WIFISETTINGS 