User Guide

 AtthetimeclockLoginpageenterthedefaultlogininformation,andclickSubmit.
o DefaultUsername:admin
o DefaultPassword:admin
 Changeyourpassword.
 Typethedefaultadministratorpassword.
 Typeyournewpassword.
 Confirmyournewpassword.

RESETTING THE SUPERVISORMODE SECURITY CODE
TheSupervisorModesecuritycodeissetfromthesoftwareinterface.Thedefaultsupervisorcodeis000000.Itis
recommendedyouchangethedefaultcodetoanewcodeusingthestepsbelow:
 SelectSettings|PreferencesfromtheNavigationmenu.
 ClicktheDevicetab.

TypethesupervisorcodeintheSupervisorCodefield.This
isrequiredtoaccessSupervisorModeontheemployee
timeclockterminal.
 ClickSubmittosaveyoursettings.

