User Guide

ASSIGN A STATIC IP ADDRESS TO THE TIME CLOCK
For Port Forwarding to work correctly, assign a static IP address to the time clock along with the subnet mask,
gateway address and DNS address. Your Network Administrator should be able to provide you with this
information.
 Determine an available IP address to be assigned to the time clock.
 Enter Supervisor Mode at your employee time clock terminal.
 Press on the time clock.
 Enter in your security code - the default security code is 00 00 00.
 Scroll through the options until you find the option View IP Address - press Enter.
 The current IP address of the clock will appear. Press Enter again.
 Enter the desired IP address including leading zeros. Press Enter.
Example: 192.168.004.155
 Enter the Subnet Mask - press Enter.
Example: 255.255.255.000
 Enter the Gateway address - press Enter.
Example: 192.168.004.001
 Enter the DNS address of your network - press Enter.
Example: 192.168.004.001
 Press Clear to exit out of Supervisor Mode.
Recommendation: For instruction on configuring your specific router, go to the website
www.portforward.com and select your router brand and model.
Note: If you an unsure of the gateway address, it is typically the same IP address as your router.