User Guide

 Clock Name allows you to customize a name for the Child Clock, making it easier to tell one a part from
another.
 Serial Number
 MAC Address
 Connected displays the current Parent Clock connection status of the Child Clock.
 Last Sync shows the last date and time that the Child Clock downloaded data from the Parent Clock and
sent data to the Child Clock.
 Finger Scan Statistics provides the number of total fingerprint scans done on a clock and how many of
those scans were successful. Having a lower success rate may indicate that the fingerprint reader needs to
be cleaned or that the fingerprint reader is having a problem reading fingerprints. Reset the finger scan
statistics to reset this value back to zero.
CHILD CLOCK CONNECTION DATA
You can find additional connection statistics on your multi-clock system at Help | About Your Clock.
Child Clocks provide a list of all Child Clocks that have been connected to your Parent Clock, when the Child Clock
last successfully communicated with the Parent Clock, and if the Child Clock is enabled or disabled.
UPDATING THE MULTI-CLOCK SYSTEM
To update your Multi-Clock System, follow the instructions in Chapter 9 to update the Parent Clock. Once the
Parent Clock is updated, the Child Clock(s) will automatically download the update file and update. It may take a
few minutes for the Child Clock to detect that the Parent Clock has updated.
If the Child Clock detects that it is running an older version of the software than the Parent Clock, but is unable to
update automatically, it will display a U in the top-left of the display. If this occurs, follow the instructions on
Updating Your Time Clock Using a USB Flash Drive.