User Guide

 Enter your security code. The default security code is 00 00 00.
 Press Up or Down until the Convert to Child option displays.
 Press Enter. The time clock displays, This will remove all data, then Erase all Memory.
 Press In to convert to a Child Clock.
 Choose the method that your Child Clock will use to connect to the Parent Clock. Follow the instructions
accordingly.
o Connect via Broadcast: The Child Clock will connect to the Parent Clock by searching the network
for a clock with the Parent Clock’s serial number. This is the preferred method if your multi-clock
system will be connected on a simple local area network. The Child Clock will remain connected to
the Parent Clock, even if the Parent Clock’s IP address changes.
o Connect via IP Address: The Child Clock will connect to the Parent Clock by searching the network
for a clock with the Parent Clock’s assigned IP address. This is the preferred method, if your multi-
clock system will be connected over a wide area network or remotely over the Internet.
CONNECT YOUR CHILD CLOCK VIA BORADCAST
 The clock displays Locate Parent By Broadcast? Press Enter.
 The clock will then display Finding Clocks Please Wait as it scans the network for the Parent Clock.
 Once the Child Clock locates the Parent Clock(s) on the network, the clock displays the serial number of
the Parent Clock. Select the serial number of the Parent Clock, and then press Enter.
 If there is more than one Parent Clock on the Network, press Up or Down to find the correct Parent Clock
serial number, then press Enter.
 Skip to the Continuing Multi-Clock Setup section.
CONNECT YOUR CHILD CLOCK VIA IP ADDRESS
 Press Down to select By IP Address, press Enter.
 Enter the IP address of the Parent Clock, then press Enter.
 If connecting over a LAN or WAN, enter the IP address used for accessing the software interface.
Example: 192.168.004.155
 If connecting remotely over the Internet, enter the public IP address of the Parent Clock’s router,
including leading zeros.
Example: 074.168.004.155
For additional information on connecting your multi-clock system remotely over the Internet, with port-
forwarding, refer to Chapter 15: Configure the Time Clock for Remote Access.