Manualshelf

User Guide

ManualsBrandsIcon Time Systems ManualsOffice & School SuppliesTotalPass B600 Biometric Employee Time Clock | 100% Identity Verification on Every Punch| Connect via USB, Network, Wi-Fi or Web| No Monthly Fees
81828384858687888990
Click Back to go back to the Add Non-Work page and revise the data.
If the employee does not have enough accrued time, an error page will appear.
ACCRUAL SUMMARY REPORT
To generate the Accrual Summary Report, go to the Reports icon and select Accrual Summary from the drop-
down menu.
This report lists the total benefit accrual hours available and the hours used in real time, for each employee.
REVISION ZONES
After installing the Benefit Tracking upgrade, you can access the Revision Zones by going to Lists | Departments
and clicking on the individual department to add revision zones to.
In the In Revision Start Time field, enter a time in hh:mm:a/p format. For example, 7:30a.
In the In Revision End Time field, enter a time in hh:mm:a/p format. For example, 8:00a.
Example: In the example above, if an employee clocks In between 7:30 a.m. and 8:00 a.m., the shift start
time rounds to 8:00 a.m.
In the Out Revision Start Time field, enter a time in hh:mm:a/p format. For example, 4:30p.
In the Out Revision End Time field, enter a time in hh:mm:a/p format. For example, 5:00p.
Example: If an employee clocks Out between the Out Revision Start and End Time, the shift end time
rounds to the Out Revision Start Time, which is 4:30 p.m.
Note: Making a change to the revision zones will prompt the time clock to restart. This will make the time
clock unavailable until the clock fully reboots.