User Guide

 You should be directed to the time clock Login page.
CONNECTING USING A WPS WITH PIN
ENABLE WPS PIN CONNECTION ON THE CLOCK
 Find the WPS PIN on the label on your router.
 Enter Supervisor Mode at your employee time clock terminal.
 Press on the time clock.
 Enter your security code. The default security code is 00 00 00.
 Use the up or down arrows to scroll until you find Network Settings.
 Press Enter.
 Find WiFi Settings, press Enter.
 Find WPS Setup, press Enter.
 Find PIN, press Enter.
CONNECT TO THE WIRELESS NETWORK
 Use the up or down arrows to scroll until you find View Networks, press Enter.
 Find your Network in the list, using the up or down arrow, press Enter.
 When prompted, enter the WPS PIN number using the keypad, press Enter.
 When connected, a confirmation displays with the IP address.
 Write down the IP address.
 Open a Web browsers on your PC. Type in the IP address in the Web browser URL bar, press Enter.
 You should be directed to the time clock Login page.
CONNECTING USING THE SOFTWARE INTERFACE
To connect your time clock to the wireless network using the software interface, you must first have it connected
to your network or computer using the Ethernet or USB cable.
 Log into your time clock software interface, on either a Parent Clock or Child Clock.
 Go to Settings | Network Settings. The Wifi Network Settings screen displays the available wireless
networks.