User Guide

 Repeat step 9 until all characters of the password have been entered. Connect to the Clock
 Press Enter. When connected, a confirmation displays with the IP address.
 Write down the IP address.
 Open a Web browsers on your PC. Type in the IP address in the Web browser URL bar, press Enter.
 You should be directed to the time clock Login page.
CONNECTING USING A WPS BUTTON
 Enter Supervisor Mode at your employee time clock terminal.
 Press on the time clock.
 Enter your security code. The default security code is 00 00 00.
 Use the up or down arrows to scroll until you find Network Settings.
 Press Enter.
 Use the up or down arrows to scroll until you find WiFi Settings.
 Press Enter.
 Use the up or down arrows to scroll until you find WPS Setup.
 Press Enter.
 Use the up or down arrows to scroll until you find Push.
 Press Enter. Press the WPS key on your wireless router within 2 minutes.
 When connected, a confirmation displays with the IP address.
 Write down the IP address.
 Open a Web browsers on your PC. Type in the IP address in the Web browser URL bar, press Enter.
Note: The default mode for the password is alpha lower case. To change the mode, press the Department
Transfer icon on the bottom right of the clock’s keypad. To erase a character, press Clear.