User Guide

CHAPTER 11: TIME CLOCK TERMINAL SUPERVISOR MODE
Advanced Supervisor Mode Options
 Customize Network Settings
 Reset Software Admin Password
LOG INTO SUPERVISOR MODE
 Enter Supervisor Mode at your employee time clock terminal.
 Press on the time clock terminal.
 Enter in your security code - the default security code is "00 00 00".
 Scroll through the options using Up or Down.
 Press Enter, when you find the option you would like to view.
 To exit Supervisor Mode, press Clear.
PARENT CLOCK SUPERVISOR MODE SETTINGS
VIEW IP ADDRESS
Look up the IP address assigned to the clock. Also, allows for assigning a static IP address, subnet mask, gateway,
and DNS.
NETWORK SETTING
LAN SETTINGS
SET IP ADDRESS
Look up the Ethernet IP address assigned to the clock. Also, allows for assigning a static IP address, subnet mask,
gateway, and DNS.
 To assign a static IP address, follow the instructions under Assign a Static IP Address to the Time Clock.
 To erase all network settings and revert to DHCP so that the router will assign the IP address, set the IP
address to 000.000.000.000.
WIFI SETTINGS
SET IP ADDRESS