User Guide

 At the time clock Login page enter the default login information, and click Submit.
o Default Username: admin
o Default Password: admin
 Change your password.
 Type the default administrator password.
 Type your new password.
 Confirm your new password.
RESETTING THE SUPERVISOR MODE SECURITY CODE
The Supervisor Mode security code is set from the software interface. The default supervisor code is 00 00 00. It is
recommended you change the default code to a new code using the steps below:
 Select Settings | Preferences from the Navigation menu.
 Click the Device tab.
 Type the supervisor code in the Supervisor Code field. This
is required to access Supervisor Mode on the employee
time clock terminal.
 Click Submit to save your settings.