User Guide

 Select the file in the Choose File window and click Open.
 Click Submit in the Restore Backup File screen to restore the backup file. A warning message will display
reminding you that your current data will be overwritten at the employee time clock.
 Click OK to continue. It may take several minutes to restore a backup file. The employee time clock will
display a Please Wait and then a Performing Restore message.
After the restore is complete, you will be required to log back into the time clock to view the backup information.
RESTORE A TIME CLOCK DATA BACKUP FROM A USB FLASH DRIVE
Restoring a backup of your data is easy using your USB flash drive. Be sure to save a current backup file before
restoring another backup. Follow the directions below to restore a backup from a USB drive.
 Copy the backup file data to the root of the memory stick.
 Rename the file to backup.db and ensure the name is all in lower case letters.
 Connect the storage device to the bottom of the employee time clock.
 Enter Supervisor Mode on the employee time clock.
 Press on the time clock.
 Enter in your security code - the default security code is "00 00 00".
 Press Up or Down until RESTORE BACKUP displays and press ENTER.
 If the file is found, Restoring Data, then Performing Restore displays. The time clock reboots.
 After the time clock reboots, log back into the employee time clock software to view your historical data.
REMOVING DATA FROM YOUR TIME CLOCK
Before removing punch data from your clock, be sure to save a backup of your existing data.
 Go to Files | Delete Old Punches.
 Select a date using the calendar in the Delete Punches Prior to field.
Note: The backup is a proprietary file that cannot be used or opened using any other program.