User Guide

 Click Save.
 After the download is complete, click Close.
DATA BACKUP TO A USB FLASH DRIVE
Creating a backup of your data can be simplified even further by saving your backup to a USB flash drive. A flash
drive is a portable device that you can purchase at any computer store. Follow the directions below to create a
backup of your time clock data using a USB flash drive.
 Plug the USB flash drive into the bottom of the time clock.
 Enter Supervisor Mode:
 Press on the time clock.
 Enter your security code - the default security code is "00 00 00".
 Press Up or Down until the DOWNLOAD BACKUP option displays.
 Press ENTER. The clock will display Backing up data and then Backup complete.
RESTORE TIME CLOCK DATA BACKUP
On occasion, you may need to restore historical data to your time clock. Follow the instructions below to restore a
backup of your time clock data.
RESTORE A TIME CLOCK DATA BACKUP FROM THE SOFTWARE INTERFACE
 To restore a backup file, select Files | Restore Backup.
 Type your password in the Current Password field.
 Click Browse and navigate to the location of your backup file.
Note: The backup file saved on the USB flash drive is called backup.db. This file can be renamed and
transferred to a folder on your main computer.
Important: Restoring a backup file will OVERWRITE the current data on the clock. Create a CURRENT
backup of your data before attempting to restore and view “historical” data.