User Guide

Latitude/Longitude: The location of the employee when they created the punch.
Accuracy: The accuracy of the coordinates given by the GPS.
Example: The accuracy of this punch is up to 372 feet. In other words, the employee was within a 372ft radius of
the coordinates given.
Speed: States how fast the employee was traveling when they created the punch.
IP ADDRESS RESTRICTION
Using IP Address Restriction, you can restrict employees from punching from unauthorized locations. This
information can be flagged and tracked on your reports.
IP address restrictions are enforced by setting authorized IP addresses globally (company-wide) and/or by
employee.
SETTING AUTHORIZED IP ADDRESSES GLOBALLY
Global Authorized IP Address(es) assigns the IP address that all employees can use. To set this, follow the
instructions below.
 Select Settings | Preferences and click the Device tab.
 In the Global Authorized IP Address(es) field, enter the IP address(es) of the computer (or other web-
enabled device) the employees are authorized to punch in/out on.
 The authorized IP address can be listed in the following ways.
Any IP Address: Leave the field blank to allow employees to punch in/out from any IP address.
 Multiple IP Addresses: Put a comma between the authorized IP addresses to allow the employee to
punch from any IP address listed.
Example: 192.168.3.6, 192.168.3.78
 Range of IP Addresses: The employee can punch at computers with an IP address that falls within the 30-
45 range.
Example: 192.168.3.30-45