User's Manual

43
Restore the factory default settings
To restore your QconPro G2 settings to factory default, simply launch iMap and
import the original settings (i.e. without making any changes) to the device through
the following steps.
1. Connect QconPro
G2
with the provided USB cable and launch iMap software.
2. Click the “MIDI Device” button and select “QconPro
G2
” as the MIDI input and
output device.
Note:
If QconPro G2 does not appear on the pull down menu, select USB audio
as the MIDI I/O device.
3. Click “Send Data” to upload the setting to your QconPro
G2
.
4. Close iMap, and then turn the QconPro
G2
power of off & on again.