User's Manual
4
Introduction
What's in the package?
Thank you for purchasing the ICON ProAudio QconPro G2 Midi/Audio control
surface. We sincerely trust this product will provide years of satisfactory service, but
if anything is not to your complete satisfaction, we will endeavor to make things right.
In these pages, you'll nd a detailed description of the features of the QconPro G2,
as well as a guided tour through its front and side panels, step-by-step instructions
for its setup and use, and full specications.
You'll also nd a warranty card enclosed - please don't forget to ll it out and mail it
so that you can receive online technical support at:
www.iconproaudio.com
, and
so we can send you updated information about these and other ICON ProAudio
products in the future. As with most electronic devices, we strongly recommend you
retain the original packaging. In the unlikely event the product must be returned for
servicing, the original packaging (or reasonable equivalent) is required.
With proper care and adequate air circulation, your QconPro G2 will operate without
any trouble for many years. We recommend that you record your serial number in
the space provided below for future reference.
Please write your serial number here for future reference:
Purchased at:
Date of purchase:
● QconPro G2 USB-MIDI Controller x 1pc
● CD x 1
App software – iMap (Mac & Windows)
User manual & QSG
● Quick Start Guide x 1
● Screwdriver x 1
● USB2.0 Cable x 1
● AC adaptor x 1pc