User's Guide

III. PRECAUTIONS FOR USE

This document is intended to help you to install and use the TMS-SA radar in an appropriate and safe

manner. It is therefore essential that you read it carefully before using the equipment. This manual

contains important instructions that will help you to avoid dangers and extend the life of your

equipment and its accessories.

Closely follow the instructions in this manual to avoid danger to yourself and third parties as well as

damage to the equipment.

Please contact your dealer for any questions that this manual does not answer.

1. USE OF THE TMS-SA

The TMS-SA is intended solely for the collection of traffic data (detection of vehicles for counting,

classification and speed measurement). Do not use the TMS-SA for any other purpose or in an

inappropriate manner.

2. IDENTIFICATION OF THE EQUIPMENT

The ultra-high frequency TMS-SA radar is equipped with a label bearing the serial number. Do not

remove this label. You will be asked for this number for any after-sales or support activity. Please be

prepared to quote this number when communicating with after-sales service.

3. SAFETY INSTRUCTIONS

• Before installation and first operation, please observe the instructions in this manual. The

manual must be available at all times.

• Ensure that no liquid enters the equipment.

• If you notice any deterioration of any kind (damaged or stripped cable, damaged connector

...), disconnect the equipment and contact your supplier.

• Any malfunction of the equipment that reduces the safety of the users or third parties must

be rectified immediately. Ensure that the identification labels and/or safety labels are

complete and legible.

• The guarantee does not cover damage resulting from improper use. The manufacturer

cannot be held responsible for damage caused by improper use of the equipment.

• The equipment cannot be used as a safety component in the sense of European Directive

98/37/EC ("Machinery Directive”).

• The user of the equipment must ensure that the operating mode chosen does not cause any

damage to material or third parties and that all safety measures and equipment are in place

and functioning.

• No modification, whether mechanical or electrical, can be made without the permission of

the manufacturer. Use only original parts and accessories, failure to do so can void the

guarantee.

• During installation, be careful when using a ladder for securing the support on the post or

the radar on its support. Check the stability of the ground before using any means for

reaching the desired height of the installation.

• We recommend the use of a padlock for securing the radar on its support.