User's Guide

X. RADAR CHARACTERISTICS

1. PHYSICAL DESCRIPTION

The system is composed of a housing containing the radar and batteries as well as the accessories

needed for its operation.

Black plastic box containing:

∙ Mounting bracket, secured in the box

∙ Microwave module (antenna and microwave source)

∙ Electronics board for signal processing and data storage

∙ Batteries (6 V/12 Ah)

∙ Switch

∙ Closing clips

∙ Display LED

∙ Mounting screw

∙ Connector for power supply and charging the battery

∙ Bluetooth wireless communication module

Accessories:

∙ Case

∙ Tape measure (8 m)

∙ Post mount

∙ External charger

∙ Viewfinder

∙ Software for processing the data and configuring the radar

∙ User manual

Dimensions of the box:

∙ Width: 245 mm

∙ Height: 300 mm

∙ Thickness: 281 mm,

∙ Total weight with lead-acid battery and bracket: approx. 8 kg

2. TECHNICAL CHARACTERISTICS

a. Power supply

The equipment is supplied by an internal battery with a nominal charge voltage of approximately

6.4 V. This value is reached after approximately 10 to 15 hours of battery charging. An external

mains 110 or 220 V charger is supplied with the unit. When charging from the mains, a red indicator

lamp is lit on the external charger. The battery is fully charged when the green lamp is lit. It is

possible to use the radar while the batteries are charging. It is recommended to recharge the battery

regularly even when you are not using the equipment to prevent battery wear.

Caution

- To prevent polarity reversal, never use a cable or charger other than those supplied with the

equipment.

- Do not store the TMS-SA with discharged batteries.