M 1IC-PCR1000 INSTALLATION (IC-PCR1000) [T Veniremen the 8 screws from tha cover as Shown below. Remove ihe cover. @ Slide’ the insulating case onto the UT-106 as shown blow. ‘ {3} Remove the connection cable (P11} rom J4. Connect the cable told an the UT-106. Ir slating case: @ Plug the connection cabs (1) from the UT-106 into 34 (& Plug the flat cable into 43 on the UT-106 and d3 on the 1C-PORT000; #Take care of the: conductor direction; (& Replace the 8 screws and cover. Conductor side. Conductor tilde.
