Operation Manual

v
ABOUT THE AUDIO COMMUNICATION IN THE REMOTE
CONTROL SYSTEM
In the remote control system, audio is exchanged between a Base station radio and the Remote station’s PC,
through Remote Utilities, as illustrated below.
The audio settings needed are described below.
When connecting to the network through a PC
Network
Base station’s PC
VL
Remote
Utility
VL
Remote station’s PC
Remote
Utility
Remote
Controller
Radio
Base station
Remote station
When connecting to the network directly
Network
Remote station’s PC
： Receive audio ： Transmit audio
VL
Remote
Utility
Remote
Controller
Base station Remote station
IC-7851
IC-7850
IC-7800 (firmware version 3.00 or later)
IC-7700 (firmware version 2.00 or later)
(Radio/Server)
D Base station settings for audio commu-
nication
When connecting to the network through a PC
•Audioleveladjustmentforanaudiodevice
(pp.5to8)
•Audiodeviceselection(p.23)
•
Audio sampling rate or audio codec setting (p.23)
When connecting to the network directly
•
Audio sampling rate or audio codec setting (p.31)
D Remote station settings for audio com-
munication
•Audioleveladjustmentforanaudiodevice
(pp.5to8)
•Audiodeviceselection(p.36)
•Networkaudioquality adjustment (p.35)
•AForModulationaudiovolumeleveladjustment
(p.37)
•Modulationoutputconnectorsetting(p.42)
•Modulationleveladjustment(p.42)