Instruction Manual

1. Place the controller bracket on a dashboard or
console.
Place the MBF-1 holder. Refer to the MBF-1 installation
manual.
2. Attach the bracket to the Controller.
Tighten the screws to attach the bracket to the Controller.
(The screws are supplied with the MBA-1)
3. Connect the Controller to the bracket
There are 2 ways to mount the controller. Select the best way
for your environment.
The controller can be installed on the dashboard of a ve-
hicle or console by using the optional Controller bracket.
• Controller installtion procedures
Brace knob
Suction cup
MBF-1
(Optional)
Screws
MBA-1
Controller
MBF-1 bracket hook
Nut
Adjust knob
q Insert the MBA-1 guide to the MBF-1 bracket hook.
w Tighten the nut.
e Adjust the tilt with the adjust knob.
MBA-1
(Optional)
4. Cushion
If the Controller vibrates and hits to the dashboard or console
when driving, use the cushion supplied with the Controller
bracket.
When the Controller is fixed, tighten the adjustment knob
while pressing it to the stuck cushion. The MBF-1 includes 2
sheets of cushions for each different thickness.
MBF-1 Bracket hoo
k
Nut
Adjust knob
r Insert the MBA-1guide to MBF-1 bracket hook.
t Tighten the nut.
y Adjust the angle, then tighten the adjust knob.
Cushions
MBA-1
Installing the Controller