Operation Manual
62
7
DSC OPERATION
New2001
DSC Data Output D
Select an option for the DSC Data Output function.
When receiving a DSC call, this function makes the trans-
ceiver send the DSC data from its NMEA Output port to a
connected device.
Enter “DSC DATA OUTPUT” q
in the DSC Settings menu
.
MENU ➪ DSC Settings ➪ DSC Data Output
(Push [MENU])
(Rotate Dial, then push [ENT].)
Rotate Dial to set the DSC Data Output function to “All Sta- w
tion,” “List Station” or “OFF,” then push [ENT].
•Push[BACK]tocancelandreturntotheDSCSettingsmenu.
(default)
All Station : Outputs the call from any vessel from the
NMEA Output port.
List Station : Outputs the call from any vessels listed on
the Individual ID screen.
OFF : Does not output any call to the external
equipment.
Push [EXIT] to return to the normal operating mode. e
Alarm D
Set the Alarm function ON or OFF, depending on the Cat-
egory or Status.
Enter “ALARM” q
in the DSC Settings menu
.
MENU ➪ DSC Settings ➪ Alarm
(Push [MENU])
(Rotate Dial, then push [ENT].)
Rotate Dial to select the status, then push [ENT]. w
•Push[BACK]tocancelandreturntotheDSCSettingsmenu.
•“Safety,”“Routine,”“Warning,”“Self-Terminate”and“Discrete”are
selectable. (default: ON )
Rotate Dial to set the Alarm setting to “ON” or “OFF.” e
Push [EXIT] to return to the normal operating mode. r