User Manual

65
14
SPECIFICATIONS AND OPTIONS
■ Specications
IC-M93D
D General
• Frequency coverage: TX 156.025 ~ 157.425 MHz
RX 156.050 ~ 163.275 MHz
• Mode: FM (16K0G3E), DSC (16K0G2B)
• Operating temperature range: –20°C ~ +60°C (–4°F ~ +140°F)
• Current drain (approximately): Tx (5 W) 1.5 A
Tx (1 W) 0.7 A
RX maximum audio 0.25 A (External)
0.45 A (Internal)
• Power supply requirement: 7.2 V DC nominal (negative ground)
• Frequency stability: ±10 ppm
• Antenna impedance: 50 ˘ nominal
• Dimensions (approximately): 57 (W) × 144.6 (H) × 38.5 (D) mm
(Projections not included) 2.2 (W) × 5.7 (H) × 1.5 (D) inches
• Weight (approximately): 265 g/9.3 oz with BP-285
D Transmitter
• Output power: 5 W/1 W
• Modulation system: Variable reactance frequency
modulation
• Maximum frequency deviation: ±5.0 kHz
• Adjacent channel power: 70 dB
• Spurious emissions (typical): –68 dBc
D Receiver
• Sensitivity (typical): 0.25 µV (12 dB SINAD)
• Squelch sensitivity (threshold, typical):
0.25 µV
• Intermodulation rejection ratio: 70 dB (typical)
•
Spurious response rejection ratio: 70 dB (typical)
• Adjacent channel selectivity: 70 dB (typical)
• Audio output power (at 10% distortion):
0.35 W typical (External)
with an 8 ˘ load
0.9 W typical (Internal) with a
12 ˘ load at 1 kHz
IC-M93D EURO
D General
• Frequency coverage: TX 156.000 ~ 161.450 MHz
(156.000 ~ 161.600 MHz for Dutch version)
Rx 156.000 ~ 163.425 MHz
• Mode: FM (16K0G3E), DSC (16K0G2B)
• Operating temperature range: –15°C ~ +55°C
• Current drain (approximately): TX (5 W) 1.5 A
TX (1 W) 0.7 A
RX maximum audio 0.25 A (External)
0.45 A (Internal)
• Power supply requirement: 7.2 V DC nominal (negative ground)
• Frequency stability: ±1.5 kHz
• Antenna impedance: 50 ˘ nominal
• Dimensions (approximately): 57 (W) × 144.6 (H) × 38.5 (D) mm
(Projections not included)
• Weight (approximately): 265 g with BP-285