User Manual

55
10
MENU SCREEN
■ Radio Settings items
Scan Type (Default: —)
The transceiver has 2 scan types. Select Normal Scan and
Priority Scan.
• Normal Scan: Scans all Favorite channels in the selected
channel group.
• Priority Scan:SequentiallyscansallFavoritechannels,
whilemonitoringChannel16.
L The default setting differs, depending on the transceiver version.
Scan Timer (Default: Off)
You can use the Scan Timer to pause, or to resume after 5
seconds,whenasignalisdetected.
• On: When a signal is detected on a channel, the scan
pauses for 5 seconds, and then resumes. If the
signal disappears in less than 5 seconds, the scan
immediately resumes.
• Off: When a signal is detected on a channel, the scan
pauses until the signal disappears, and then resumes.
Dual/Tri-watch (Default:Dualwatch)
SelectDualwatchorTri-watch.
• Daulwatch: MonitorsChannel16whilereceivingon
another channel.
• Tri-watch: MonitorsChannel16andtheCallchannel
whilereceivingonanotherchannel.
LSee page 18 for details.
CHAN Group (Default: —)
Selectthesuitablechannelgroupforyouroperatingarea.
SelectINT,USA,CAN,DSC,orATISdependingonthe
transceiver version.
LSee page 12 for details.
WX Alert (Default: Off)
FortheUSA,Australian,andExportversions,anNOAA
broadcaststationtransmitsaWeatherAlerttonebeforeany
importantweatherinformation.
L“WX ”isdisplayedinsteadof“WX.”
L“WX ”blinksuntilyoupushakeyafterdetectinganalert.
• On with Scan: The preset Weather channels are
sequentiallycheckedwhilescanning.
• On:
The previously selected (last used) Weather
channelischeckedwhilescanning.
• Off: TheWeatherAlerttoneisnotdetected.
Monitor (Default: Push)
Holddown[VOL/SQL]for1secondtoturnONtheMonitor
function.Thesquelchopens.
Youcanselectwhetherthesquelchcloseswhenyourelease
[VOL/SQL],orwhenyoupushanykey.
• Push: Thesquelchstaysopenwhileholdingdown
[VOL/SQL].
• Hold: Thesquelchstaysopenuntilyoupushanykey.