User Manual

48
9
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Adding a Waypoint:
Pushthesoftwarekeybelow[ADD]toaddaWaypoint.
L Add the Waypoint in the same manner that is described in
“Manually entering a Waypoint” on page 46.
Editing a Waypoint:
While selecting the Waypoint that you want to edit, push the
softwarekeybelow[EDIT]toedittheWaypoint.
L Edit the Waypoint in the same manner “Manually entering a
Waypoint” on page 46 for editing a Waypoint.
Deleting a Waypoint:
1. Select the Waypoint that you want to delete, and then
pushthesoftwarekeybelow[DEL]todeleteit.
• “Are you sure?” is displayed.
2. Push the software key below
[OK]todelete.
LSelect[CANCEL]tocancelthe
deletion.
■ Navigation
The Navigation function navigates from your current position
to an entered regular Waypoint or MOB waypoint.
Start navigating to the MOB waypoint:
L The MOB waypoint must be entered before navigating.
1. Push[◄]or[►]todisplay .
2. Push the software key below
.
• The “MOB” screen is displayed.
3. Push the software key below
[NAV]tostartnavigatingtothe
MOB waypoint.
• The navigation starts.