User Manual

45
9
OTHER FUNCTIONS
■ MOB (Man OverBoard)
You can enter a Man OverBoard (MOB) waypoint into the
transceiver with its GPS position data, as soon as a person
has fallen into the water and needs to be rescued. This
enables you to reach the MOB position even in the dark, or
when you have lost visual contact.
D Entering an MOB waypoint
1. Push[◄]or[►]todisplay .
D MOB screen
1. Push[◄]or[►]todisplay .
2. Push the software key below .
• The “MOB” screen is displayed.
L You can also display the “MOB”
screen by selecting the “MOB” item
on the Menu screen.
L “No Entry” is displayed if no MOB
waypoint is entered.
3. Push the software key below
[NAV]tostartthenavigation,
[DEL]todeletetheentry,and
[EXIT]toclosethe“MOB”screen.
Navigating to the MOB waypoint:
The transceiver can navigate you to
the MOB waypoint.
Pushthesoftwarekeybelow[NAV].
L See page 48 for navigation details.
2. Hold down the software key below
for 1 second to enter the
MOB waypoint.
• After entering, “Man Overboard!” is
displayed.
L You cannot enter the MOB waypoint
if no GPS data is received.
L You can only enter 1 MOB waypoint,
and the previously entered point is
overwritten when a new waypoint is
entered.
3. Push[ENT]tostartthenavigating
to the entered point.
L See page 48 for navigation details.
LPushthesoftwarekeybelow[EXIT]
to stop the navigation and return to
the operating screen.
Deleting the MOB waypoint:
1. Pushthesoftwarekeybelow[DEL]todeletetheMOB
waypoint.
• “Are you sure?” is displayed.
2. Pushthesoftwarekeybelow[OK]todelete.
L You can cancel the deletion by pushing the software key
below[CANCEL].
• “No Entry” is displayed.