User Manual
Table Of Contents
- Front cover
- IMPORTANT
- FEATURES
- EXPLICIT DEFINITIONS
- IN CASE OF EMERGENCY
- PRECAUTIONS
- RECOMMENDATION
- INFORMATION
- DISPOSAL
- COUNTRY CODE LIST
- TABLE OF CONTENTS
- 1. OPERATING RULES
- 2. SUPPLIED ACCESSORIES AND ATTACHMENTS
- 3. PANEL DESCRIPTION
- 4. PREPARATIONS
- 5. BASIC OPERATIONS
- 6. SCAN
- 7. DUALWATCH/TRI-WATCH
- 8. DSC OPERATION
- 9. OTHER FUNCTIONS
- 10. MENU SCREEN
- 11. BATTERY CHARGING
- 12. OPTIONAL SPEAKER MICROPHONE
- 13. TROUBLESHOOTING
- 14. SPECIFICATIONS AND OPTIONS
- 15. CHANNEL LIST
- 16. SAFETY TRAINING INFORMATION
- INDEX
- Back cover
37
8
DSC OPERATION
New2001
D Receiving an All Ships call
When an All Ships call is received:
• The alarm sounds.
• “RCVD All Ships Call” is displayed.
1. Push any software key to turn OFF the alarm.
L The trafc channel that is assigned by the caller is
automatically selected after 10 seconds by default.
2. Push the software key below your next operation.
[IGN]
• Ignores the call and returns to the operating screen.
• The call is saved in the DSC Log.
• “
” blinks continuously until you display the call message.
[ACPT]
• Accepts the call.
• The assigned channel is selected.
• The call is saved in the DSC Log.
[EXIT]
Closes the All Ships call, and then
returns to the operating screen.
[INFO]
The received call’s information is
displayed.
[PAUSE]
L [PAUSE] is not displayed if the “CH Auto Switch” item is set to
“Manual.” (p. 42)
• Pauses the countdown until the assigned channel is
automatically selected.
• Select [RESUME] to resume the countdown.
• The call is saved in the DSC Log.