User Manual

36
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Receiving a Group call
When a Group call is received:
• The alarm sounds for 2 minutes.
• “RCVD Group Call” is displayed.
1. Push any software key to turn OFF the alarm.
L The channel that is assigned by the caller is automatically
selected after 10 seconds by default.
2. Push the software key below your next operation.
[IGN]
• Ignores the call and returns to the operating screen.
• The call is saved in the DSC Log.
• “
” blinks continuously until you display the call message.
[ACPT]
• Accepts the call.
• The assigned channel is selected.
• The call is saved in the DSC Log.
[EXIT]
Closes the Group call, and then
returns to the operating screen.
[INFO]
The received call’s information is
displayed.
[PAUSE]
L [PAUSE] is not displayed if the “CH Auto Switch” item is set to
“Manual.” (p. 42)
• Pauses the countdown until the assigned channel is
automatically selected.
• Select [RESUME] to resume the countdown.
• The call is saved in the DSC Log.