User Manual

33
8
DSC OPERATION
New2001
4. Select the reply “Able to Comply.”
LSelect “Unable to Comply” if you cannot send a reply call.
5. Push the software key below [CALL] to send the reply.
• “Transmitting Position Reply” is displayed.
• After sending, the replied information is displayed.
6. Push the software key below [EXIT]
to return to the operating screen, or
below [RESEND] to resend.
• A confirmation screen is displayed.
7. Push the software key below [OK]
to return to the operating screen.
D Sending a Position Reply call (Continued)
Sending on the “Compose Other” screen
You can also send a Position Reply call by selecting
“Position Reply” on the “Compose Other” screen.
This enables you to reply even after ignoring the call when
you rst received it.
1. Push the software key below
.
• The ”Compose Other” screen is displayed.
2. Push [▲] or [▼] to select “Position Reply,” and then
push [ENT].
• The caller’s station or MMSI is displayed.
L “Position Reply” is not displayed if no Position Request call
has been received.
3. Select the station to send a Position Reply call to, and
the push [ENT].
4. Repeat steps 4 to 7 described in the left column.
TIP: If no valid position is received while selecting [ACPT]
in step 2, and selecting “Able to Comply,” the position and
time entry screen is displayed.
LSee “Entering the position and time” on page 22 for details.