User Manual

20
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Entering a Group ID
You can enter a total of 25 Group IDs, and assign names of
up to 10 characters.
1. Display the “Group ID” screen.
[MENU] ► “DSC Settings” ► “Group ID”
• “No ID” is displayed if no ID is entered.
2. Push the software key below [ADD].
• The Group ID’s entry screen is displayed.
3. Enter the Group ID and its name in the same way as
described on the previous page.
4. After entering, push the software
key below [DONE] to save, and
return to the previous screen.
• The entered name is displayed.
NOTE: The rst digit is xed as
“0” for a Group ID.
The rst two digits are xed as
“0” for any Coast station ID.
D Deleting an Individual ID or Group ID
[Example: Deleting an Individual ID: ICOM #2]
1. Display the “Individual ID” screen.
[MENU] ► “DSC Settings” ► “Individual ID”
2. Push [▲] or [▼] to select “ICOM #2.”
3. Push [►] to display [DEL].
4. Push the software key below [DEL].
• “Are you sure?” is displayed.
5. Push the software key below [OK] to delete.
L Push the software key below [CANCEL] to cancel the
deletion.
• The selected ID is deleted, and then returns to the previous
screen.
TIP: You can edit an ID and its name by pushing the
software key below [EDIT] in step 3.