Operation Manual

9
3
PANEL DESCRIPTION
Softkey function ■
Various functions can be assigned to the softkeys.
When the key function is assigned, the key icon is displayed
above the softkeys, as shown below.
Softkey function selection D
When “Ω” or “≈” is displayed beside the key icon, pushing [Ω]
or [≈] sequentially displays the previous or next key function
that is assigned to the softkey.
Push Push
*Push this key to start or stop a scan.
*
The order of the key icons may differ, depending on the
preprogramming.
Function Display (Continued) ■
!5 POSITION INDICATOR
Shows the current position when valid GPS data is re- ➥
ceived or the position is manually programmed.
• “??” will blink when invalid GPS data is received for 30
seconds.
• “??” will blink when manually input GPS data is no longer
valid after 4 hours, and then “NO POSITION” will appear
after 23.5 hours.
• “NO POSITION” is displayed when no GPS data is received
since the transceiver power turned ON.
• “NO POSITION” appears when no GPS data is received,
and no position is manually input.
!6 SCAN INDICATOR
“SCAN 16” is displayed during a Priority scan; “SCAN” ➥
appears during a Normal scan. (p.
17)
“DUAL 16” appears during Dualwatch; “TRI 16” appears ➥
during Tri-watch. (
p. 19)
!7 BATTERY INDICATOR
Shows the battery’s remaining power.
Indication
Full Middle
Charging
required
No battery
Battery level
blinks when the battery is over charged.