User Guide

21
8
SET MODE
D VOX gain “ga”
Adjusts the VOX gain (from 1 to 6) to level when speaking
with the optional headset.
• Setting the VOX gain to 1 increases the sensitivity.
• Setting the VOX gain to 6 reduces the sensitivity.
D VOX delay “dL”
Sets the VOX delay timer (0.5 to 3.0 sec. in 0.5 sec. steps)
that keeps on transmitting after you stop speaking.
• Setting the VOX delay to 0.5 (0.5 sec.) is a short VOX delay.
• Setting the VOX delay to 3.0 (3.0 sec.) is a long VOX delay.
SET MODE LIST
*default setting
Push
VOX gain 3 (default) VOX gain 6
Push
VOX delay 1.0 (default) VOX delay 3.0
Function Indication Switch
Beep tone function “bP” OFF/ON*/US
Priority scan function “Pr” OFF*/ON
Scan resume timer “St” OFF*/ON
Auto scan function “AS” OFF*/ON
Dual/Tri-watch function “dt” Dual*/Tri
Monitor switch action “Sq” Push*/Hold
Backlighting function “bL” OFF/1/2/3*
LCD contrast selection “LC” 1/2/3*/4
Auto power save function “PS” OFF/ON*
Self check function “SC” OFF*/ON
Battery voltage indicator “bt” OFF*/ON
Signal strength indicator “SI” OFF*/ON
Squelch sensitivity “SS” OFF*/ON
Scrambler code “cd” 1*/2/· · ·/31/32
VOX gain “ga” 1/2/3*/4/5/6
VOX delay “dL”
0.5/1.0*/1.5/2.0/2.5/3.0