User Guide

18
8
SET MODE
8
D Dual/Tri-watch function “dt”
This item selects dual or tri-watch as desired. See p. 14 for
details.
D Monitor switch action “Sq”
The monitor switch action cuts off the squelch function tem-
porarily. This switch action contains PUSH (Pu) or HOLD (Ho)
settings as shown below.
• PU (PUSH): After pushing [SQL•MONI] for 1 sec., the squelch
opens and emits audio. The squelch is held open while
continuously pushing and holding [SQL•MONI]. (de-
fault)
• HO (HOLD): After pushing [SQL•MONI] for 1 sec., the squelch
opens and emits audio even [SQL•MONI] is released.
To close the squelch, push any switch.
D Backlighting function “bL”
This function is convenient for nighttime operation. The back-
lighting brightness can be adjusted from OFF, 1 (dark)–3
(bright); 3 (default). Select 1–3 to turn this function ON.
• The automatic backlighting turns the backlighting ON when any key
except for [PTT] is pushed.
• The backlighting is automatically turned OFF after 5 sec. of inactivity.
D LCD contrast selection “LC”
The contrast of the LCD can be adjusted from 4 levels.
• 1 (bright)–4 (dark); 3 (default)
Push
default
bright
Push
Backlighting ON (default) Backlighting OFF
Push
Push setting (default) Hold setting
Push
Dualwatch function (default)
Tri-watch function