Operation Manual

■ Front panel

qAF VOLUME CONTROL KNOB

Rotate the knob to adjust the audio output level.

• Minimum audio level is pre-programmed.

wSTATUS UP/DOWN KEYS [

]/[

]

➥ During the standby condition, push to display the trans-

mit status indication and select a status number.

➥ When a received SDM is displayed, push to cancel the

automatic scroll and scroll the message manually.

➥ When an SDM that contains more than 10 characters is

displayed, push to scroll the message manually.

eFUNCTION DISPLAY (p. 3)

Displays a variety of information such as an operating

channel number/name, code, status message.

NOTE: The above functions depend on pre-program-

ming.

rCHANNEL UP/DOWN KEYS [ ]/[]

➥ During standby condition, push to select an operating

channel.

➥ After pushing [TX CODE CH], push to select a TX code

channel.

➥ After pushing [DTMF], push to select a DTMF channel.

➥ While pushing [SCAN], push to select a scan group.

➥ After pushing [DIGITAL], push to select a BIIS code, sta-

tus number or SDM.

u y t

req w

PANEL DESCRIPTION

New2001

IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 1 (1,1)