User Guide

EMERGENCY KEYS

➥ Hold down for preset period of time to transmit an emergency

call.

➥ When [Emergency Single (Silent)] or [Emergency Repeat (Si-

lent)] is pushed, an emergency call is transmitted without a beep

sound or LCD indication change.

• If you want to cancel the emergency call, push (or hold down) the

key again before transmitting the call.

• The emergency call is transmitted only once or repeatedly until re-

ceiving a control code, depending on the presetting.

TX CODE ENTER KEY

Push to enter the direct ID code edit mode, for both the 5-tone

and MSK. Then set the desired digit using [CH Up]/[CH Down] or

[TX Code CH Up]/[TX Code CH Down]. (p. 16)

TX CODE CHANNEL SELECT KEY

➥ Push to enter the direct ID code channel selection mode. Then

set the desired channel using [CH Up]/[CH Down] or [TX Code

CH Up]/[TX Code CH Down]. (p. 15)

➥ While in the ID code channel selection mode, push for 1 second

to enter the ID code edit mode. Then set the desired digit using

[CH Up]/[CH Down] or [TX Code CH Up]/[TX Code CH Down].

(p. 16)

TX CODE CHANNEL UP/DOWN KEYS

Push to directly select a TX code channel.

ID MEMORY READ KEY

➥ Recalls the detected ID codes.

• Push this key, then push [CH Up]/[CH Down] to select.

• Up to 5 ID’s are memorized.

➥ Hold down for 1 second to erase the selected memorized ID’s.

PANEL DESCRIPTION