User Guide
■ Programmable function keys
The following functions can be assigned to [P0], [P1], [P2], [P3],
[Red], [
] and [ ] programmable function keys.
Consult your Icom dealer or system operator for details concerning
your transceivers presetting.
CH UP AND DOWN KEYS
• Select an operating channel.
• Select a transmit code channel after pushing the [TX Code CH
Select] keys.
• Select a DTMF channel after pushing the [DTMF Autodial] key.
• Select a scan group after holding down the [Scan A Start/Stop]/
[Scan B Start/Stop] keys.
• Select a BIIS code, status number or SDM after pushing the
[Digital] key.
BANK SELECT KEY
Push this key, then push [CH Up] or [CH Down] to select the de-
sired bank.
SCAN START/STOP KEYS
➥ Push to start scanning. Push again to stop the scan.
➥ Hold down for 1 second to open the scan group, then select the
desired scan group using [CH Up]/[CH Down].
SCAN TAG KEY
Push to add or delete the selected channel to the scan group.
7
2
PANEL DESCRIPTION