Operation Manual

7
NXDN™ OPERATION
7-14
Transmitting a call (Continued)
D Transmitting Position data
When the GPS function is ON, and the internal GPS
receiver receives Position data, the longitude and
latitude data can be automatically transmitted:
• When a GPS request status message is received
• After sending a voice message
L Set the ‘Send with Login’ and ‘Send with Logoff’ items to
‘Enable.’
• After sending a status message
LSet the ‘Send with Status Call’ item to ‘Enable.’
• After sending a message
LSet the ‘Send with Message Call’ item to ‘Enable.’
• After sending a Call Alert
LSet the ‘Send with Call Alert’ item to ‘Enable.’
• After sending an Emergency call
LSet the ‘Send with Emergency’ item to ‘Enable.’
• At the preset interval
LSet the ‘Auto’ item to ‘Enable.’
LSet the ‘Interval Timer [mm:ss]’ item.
Previous view