Operation Manual

MDC 1200 SYSTEM OPERATION

8-17

Transmitting a call (Continued)

D Transmitting an MDC Message call (Continued)

Portable: For the Ten-key and the Simple key types

Mobile: For the LCD type

(Menu > Signaling/Call > Status)

1. Push [Menu] to display the Menu screen.

2. Push [Left] or [Right] to select “Signaling/Call,”

then

push [OK].

3. Push [Up] or [Down] to select “Message,” then

push [OK].

4. Push [Up] or [Down] to select a Message.

5. Hold down [PTT] to transmit an MDC Message

call.

• After receiving an acknowledgement, “Success” is

displayed.

• When the transceiver does not receive an

acknowledgement, “Failed” is displayed.

• After transmitting the Message call, returns to the

Standby screen.

Previous view